IBC MIXERS

BP Systems are the main distributors for Euromixers unique range of IBC mixers with E-400 folding impellers designed for use with plastic transportable (IBC) containers. We supply a range of models suitable for a variety of applications including stirring, agitating, mixing and homogenising viscous liquids and high settled solids slurries, wetting and dissolving powders.

Using the IBC as a mixing vessel, offers significant savings on transfer and cleaning time

APPLICATIONS

Chemical industries : Dyestuffs and pigments : Slurrys : Paint and varnish : Food and beverage : Water treatment chemicals and flocculants : Cosmetics industry.


CONTAINER

Designed for use on 1000 / 800 litre IBC containers with 150mm screw caps by Schutz, Sotralentz and Van Leer suitable for most container types.


TECHNICAL SPECIFICATION

MIXER SUPPORT FRAME
Lightweight stainless steel bridge which mounts directly on to the IBC frame and is secured in place with quick action toggle clamps.

LIFTING OPTIONS
As standard the mixer is supplied with an eye bolt for lifting the mixer using a hoist, or optional fork lift modules for lifting the mixer using a fork lift truck.

ELECTRIC MOTORS
380 to 415 volts 3 ph 50 Hz protection IP55 optional 240 v and 110volts 1ph fitted with Start / Stop push buttons and overload relays,

A safety interlock is integrated into the mixer support bridge and wired to the motor control to prevent the mixer from being started when not mounted on an IBC. Connection to the unit is with a 4 pin 16 amp plug / socket, Steel wire armoured flex extension cable are available - 3metre 5metre and 10 meter long

.

AIR MOTORS
Are fitted with a flow control valve and muffler.

GEAR DRIVES
Factory filled with a synthetic food quality lubricant and sealed for life.

 

SHAFT AND IMPELLERS

The mixer shaft and impellers are manufactured in 316 stainless steel.

High speed mixers are fitted with single or dual fixed impellers and low speed mixers with E-400 Folding Impellers


MODELS

HBC - high Speed Drive
LBC - low speed gear drive
Motors 0.37 - 1.50 kW electric or air.


OPTIONS

Integral electronic variable speed with a digital display. Designs are also available for introducing powders or liquids into the IBC.


MIXER SIZING AND SELECTION

The following tables provide a general selection guide. Our application engineers will be pleased to advise on mixers / agitators suitable for your specific application.


ENQUIRIES / ORDERING

Please mention container type and size: volume and mixing duty together with viscosity and SG when requesting a quotation or placing an order to enable our application engineers to confirm or propose a suitable IBC mixer selection.


CHECK LIST / OPTIONS

Drive Electric or Air
Lifting hoist standard or fork lift truck
Extension cable 3m : 5m : 10m long steel wire armored flex fitted with a 4 pin plug and socket.


OTHER PRODUCTS

BP Systems also supplies mixers for other types of IBC and Portable mixers for use on 200 Litre drums, we also have a range Stainless steel IBCs drums and containers.


Disclaimer: Whilst every effort is made to ensure the information on this website is accurate, BP Systems Ltd reserve the right to change specification without notice, in keeping with our policy of continued product development.

Copyright BP Systems 2007
Dacombe Drive, Poole, Dorest, BH16 5JN, Telephone: 01202 256 017, Mobile: 07977 137520
Designed by bradduncan.com