HEAVY DUTY MIXERS
TERA Top Entry Heavy Duty mixers provide a cost effective solution for a wide range of mixing / agitating applications, motor power mixer shaft speed and impeller configuration are individually selected for optimum performance,
Features include.
- Low headroom compact robust design
- Power range from 0.25 to 15 k W
- Mixer speed selected for each individual application
- Hollow shaft gearbox ensures accurate mixer shaft alignment
- Minimum service factor SF=1.50
- Ground gears for efficiency, low noise and optimum service life.
- Wide range of impellers to meet process requirements.
- Open tank plate mounted and closed tank models available.
|
Mixer Geardrive
TERA Mixer drives are designed on a very rigid structure enabling high bending loads, the mixer output shaft is supported by taper roller bearings or deep groove ball bearings on the smaller sizes drives gears are case hardened and ground for efficiency, low noise and maximum service life.
Gearbox housings are manufactured from aluminium up to size 70 and cast iron on larger sizes Gearboxes selections have a minimum SF (service factor) of 1.5
|  |
|
|
Mixer shaft design
The mixer shaft is designed to operate below first critical speed at all frequencies up to 50 hz if an inverter is used with the drive.
|  |
Impellers
Impellers are selected by our application engineers to meet your process requirements
Model range
Ten mixer drives are available covering a power range from 0.25kw to 15 kw. Suitable for tanks and vessels from 25 to 60,000 litres
Our engineers will be pleased to help and provide a cost effective solution for your requirements.
| Typical dimensions for low headroom - Plate mounted model |
| Model | Mounting
A | B | C | D | E | F | APPROX. MASS
LESS MOTOR |
| 28- TERA | 200 | 170 | 6 | 210 | 100 | 115 | 12KG |
| 40- TERA | 250 | 220 | 6 | 225 | 125 | 150 | 12.5KG |
| 50- TERA | 250 | 220 | 6 | 280 | 125 | 170 | 14KG |
| 63- TERA | 300 | 270 | 8 | 295 | 150 | 210 | 16KG |
| 70- TERA | 300 | 270 | 8 | 300 | 150 | 210 | 18KG |
| 85- TERA | 300 | 270 | 8 | 370 | 150 | 210 | 29KG |
| 110- TERA | 350 | 310 | 10 | 400 | 175 | 285 | 38KG |
| 130- TERA | 400 | 360 | 10 | 465 | 200 | 285 | 48KG |
| 150- TERA | 450 | 410 | 10 | 540 | 225 | 310 | 77KG |
| 180- TERA | 500 | 460 | 12 | 585 | 250 | 350 | 130KG |
| All dimensions in millimetres |
|
|
EM - HEAVY DUTY MIXERS
Euromixers - EM series top entry parallel shaft mixers have been designed on a very rigid monolithic structure enabling high bending loads, the gears are case hardened and ground for efficiency and quietness. Gearboxes selections are based on a minimum SF (service factor) of 2.0 to ensure long service life and low maintenance. A wide range of output speeds and motor powers are available for optimum mixing performance.
|  |
EM series features include.
- Standard euro voltage electric motors
- Rugged gearbox casing for strength and durability.
- Mounting plate direct mounting on the support structure or tank top.
- Case hardened and ground helical gears for efficiency and quietness in operation.
EM- series mixers are sized and selected to meet individual process requirements, a range of motor powers and mixer output speeds ensures optimum performance for a wide range of mixing applications, our process engineers will be pleased to help.
| EM- series typical dimensions. |
| Mixer size | A | B | C | D | E | F | G | H |
| EM-1 | 370 | 160 | 420 | 140 | 350 | 310 | 120 | 18 |
| EM-2 | 380 | 160 | 490 | 150 | 350 | 310 | 130 | 18 |
| EM-3 | 460 | 160 | 590 | 190 | 350 | 310 | 170 | 18 |
| EM-4 | 560 | 190 | 670 | 190 | 400 | 360 | 180 | 22 |
|
